FF20 Simple/Floating End Ball Screw Mount, Flange Type
Mfr # FF20
High-quality flange-typesupport for use on the "floating" end of a ball screw. This size mount fits shaft that is turned down to 20mm diameter.
- Most typically this size support is used on a 25mm diameter ball screw.
- FLOATING END. Single sealed ball bearing.
- Supplied with circlip/snap ring to secure shaft
- C5 accuracy rating!
- You can also use these with most brands of screws with end machining on screw's simple end 20mm. Consult our technical guide (below) for measurements to ensure compatibility.
- Click here to view our technical document for these products.