You are browsing our online store module. If you need basic or technical information for products, CLICK HERE to go to the main website module.

Detail Product Info from
the Automation 4 Less Store

Toll Free: 877-444-6789 | Tel: 704-639-0710 | Fax: 704-639-9866
P.O. Box 3502 | Salisbury, NC 28145   USA

Login Status  Login Status

Not logged in

» Login
WBF20 Simple/Floating End Ball Screw Mount, Flange Type  
Product ID: WBF20
WBF20 Simple/Floating End Ball Screw Mount, Flange Type

High-quality flange-typesupport for use on the "floating" end of a ball screw.  This size mount fits shaft that is turned down to 20mm diameter.

  • Most typically this size support is used on a 25mm diameter ball screw.
  • FLOATING END. Single sealed ball bearing.
  • Supplied with circlip/snap ring to secure shaft
  • C5 accuracy rating!
  • Some manufacturers refer to this type of end support as "FF" style.  Our supplier uses the WBF designation.  Both of these designate identical flange type, simple end supports.
  • You can also use these with most brands of screws with end machining on screw's simple end 20mm.  Consult our technical guide (below) for measurements to ensure compatibility.
  • Click here to view our technical document for these products.
Price: $40.00

Quantity: Avail:

« Previous | Next »

Copyright © 2005-2016
Automation 4 Less
Store Links: Electrical Products | Enclosures & Accessories | Stack Lights | Pneumatics
Linear Bearings/Rail | Motion Control | T-Slots Extrusions & Accesories | Process Control | Device Networking & Indus. Communication
Main Site Home | Online Store Home | Search Store | Checkout | Contact | About Us | Policies | CAD Drawings | Sitemap