You are browsing our online store module. If you need basic or technical information for products, CLICK HERE to go to the main website module.

Detail Product Info from
the Automation 4 Less Store

Toll Free: 877-444-6789 | Tel: 704-639-0710 | Fax: 704-639-9866
P.O. Box 3502 | Salisbury, NC 28145   USA

Login Status  Login Status

Not logged in

» Login
BF12 Simple/Floating End Ball Screw Mount  
Product ID: BF12
BF12 Simple/Floating End Ball Screw Mount

High-quality support for use on the "floating" end of a ball screw.  This size mount fits shaft that is turned down to 10mm diameter.

  • This support is commonly used on the simple/floating end of our BK1605and BK1610 ball screws.
  • FLOATING END. Single sealed ball bearing.
  • Supplied with circlip/snap ring to secure shaft
  • C5 accuracy rating!
  • You can also use these with most brands of screws with end machining on screw's simple end (10mm).  Consult our technical guide (below) for measurements to ensure compatibility.
  • Click here to view our technical document for these products.
Price: $39.00

Quantity: Avail:

« Previous | Next »

Copyright © 2005-2016
Automation 4 Less
Store Links: Electrical Products | Enclosures & Accessories | Stack Lights | Pneumatics
Linear Bearings/Rail | Motion Control | T-Slots Extrusions & Accesories | Process Control | Device Networking & Indus. Communication
Main Site Home | Online Store Home | Search Store | Checkout | Contact | About Us | Policies | CAD Drawings | Sitemap