|
|
|
|
 PB series Drivers & Motors |
 Now available for purchase in our online store!
Match the motor and the controller to create the optimal system for your application!
Sanyo Denki products from its PB line provide the following advantages:
- High Speed Positioning. High torque performance in the low speed range delivers shorter positioning time for short stoke/high hit rate applications.
- Smaller System Size. Smaller system size is achievable for low speed applications due to the availablity of higher torque performance in the low speed range as compared to conventional
servo motors.
- Stable Stand-Still (Holding). Complete stand-still motion is possible due to the availability of holding torque, a typical characteristic of stepping motors.
- High Resolution. The position resolution can be subdivided for higher positioning precision.
- Energy Efficiency. Higher efficiency from low heat generation is achieved by controlling the current flow to motor according to motor load.
- Simplified Control. System can be easily controlled by using the general purpose I/O to designate preset point or program numbers (up to 256 points). Comprehensive built-in amplifier
functionality includes thrust control, point designation, programming, homing, holding brake control and sensor limit input.
- Reduced System Cost and Set-Up Time.
- Cables and connectors for controller/amplifier and amplifier/motor connection are available for hassle-free setup.
- A built-in pulse generation function is included in the Model No. PB Types R and M. The amplifier receives speed, acceleration/deceleration and distance as numeric data from the upper-level device, and automatically generates an optimal speed pattern according to the commands internally. Since no separate pulse generator is required, this contributes to lower system cost.
- PC interface allows parameter setting, data editing and monitoring of position and speed to be done on a PC using the bundled setup software.
- Multi-axis systems can be reduced in size and weight using the PB-R 4-axis type.
- Compliance with International Safety Standards.
|
 |
Download the PDF catalog for the PB series. 40 pages, 3MB