CAD for rolled ball screws and related products

Toll Free: 877-444-6789 | Tel: 704-639-0710 | Fax: 704-639-9866
P.O. Box 3502 | Salisbury, NC 28145   USA
 
 
  NAVIGATION  
 

 

 

Copyright © 2005-2016
Automation 4 Less

 

Download CAD packages (Zip format) from the links below. Specific files have been prepared for EACH of the standard size screws we offer. All zip archives contain three files:

  • A PDF of the specific ball screw and nut
  • A STEP file of the ball nut
  • A STEP file of the screw

Each archive is very small (under 100 KB).

A reminder of our part # system

Example part: BSFU1605-0350-FS

  • BSFU1605...basic series, diameter and lead (mm)
  • 0350...overall length of screw (mm)
  • FS...ends machined for our standard Fixed and Simple supports

NOTE: We have updated part numbers for our products, and we will soon be updating our CAD drawings to match these. For now, the drawings you download will show old part numbers, but drawings will be accurate. For example, our new part number for a 1605mm screw that is 350mm long is BSFU1605-0350-FS. The old part number for the same item is RM1605-0350-0200-FS.
16mm x 5mm lead
16mm x 10mm lead
   
CAD drawings for FF/FK and BF/BK ball screw support units
Each archive contains PDF and STEP files for support in a given style/size.
FIXED Side
FLOATING Side
FIXED Side
FLOATING Side
-----
-----
-----
-----
We STOCK all sizes listed above.

 

Related Prods/Links

Learn lots more about our rolled ball screws and related products by accessing links below.


CLICK HERE to view PDF technical info for rolled ball screws and related products.
(Note: this catalog covers ALL products shown below.)

______________________


CLICK HERE to find out more about our high-quality and reasonably-priced ball screw end supports. We offer a broad range of sizes.

______________________


CLICK HERE to learn more about ball nut brackets that make it simple to connect a ball screw to the work you need to move.

______________________


CLICK HERE to learn about our MBA motor brackets that make it a snap to connect a servo/stepper motor with a ball screw & supports.

______________________


CLICK HERE to learn about our ECONOMICAL motor brackets for standard NEMA 17, 23 and 34 size motors.

______________________


CLICK HERE to learn more about our economical yet robust stainless steel DR1-C line of flexible shaft couplings.

 
Electrical Products | Enclosures & Accessories | Stack Lights | Pneumatics | Linear Bearings/Rail
Motion Control | T-Slots Extrusions & Accesories | Process Control | Device Networking & Indus. Communication
Home | Online Store | Search Store | Checkout | Contact | About Us | Policies | CAD Drawings