Toll Free: 877-444-6789 | Tel: 704-639-0710 | Fax: 704-639-9866
E-mail: info@automation4less.com | P.O. Box 3502 | Salisbury, NC 28145

AC Variable Speed Drives

 


AC Variable Speed Drives Less Than 500hp
(Click here to go to our store to browse inverter drives)

Note: While many of our Hitachi drives can operate with either single-phase or three-phase input current, the ONLY type of motor they can control is a three-phase motor. The drives below cannot be used to control the speed of single-phase motors.
    X200 Series....high performance at a terrific price!
    Powerful features:
  • Contactor-style package (power in at top/motor out at bottom)
  • Emergency stop function
  • Improved trip avoidance
  • Advanced logic and calculate functions
  • Suitable for side-by-side mounting
  • Patented micro-surge voltage suppression
  • Non-stop operation after instantaneous power failure
  • Built in RS-485 Modbus/RTU
  • Ratings ¼ to 3 hp [input current 230 V, single or 3-phase]; 5 to 10 hp [input current 230 V, 3-phase]; ½ to 10 hp [input current 460 V, 3-phase]
  • For use with 3-phase motors only!
  • Purchase information is available in our store

NOTE: The X200 series has superseded the L200 series. X200 models offer MORE FEATURES and LOWER COST.
    SJ200 Series....best price/performance for a micro drive
  • New Intelligent Sensorless Vector Control – NO Autotuning Required!
  • Up to 200% Starting Torque
  • Most compact Hitachi inverter ever
  • Advanced Logic and Calculate functions
  • Removable terminal strips for easy wiring
  • Dynamic Braking transistor built in
  • Advanced trip avoidance functions
  • Removable Keypad
  • NEMA4X Remote Keypad option
  • MODBUS RTU RS-485 built in
  • Ratings: ¼ to 10hp [input current 230V, single phase or 3 phase]; ½ to 10hp [input current 460V, 3 phase]
  • For use with 3-phase motors only!
  • Purchase information is available in our store
    SJ700 Series (this line supersedes the SJ300 line of drives)

Main Brochure
Instruction Manual
Service Manual

Click here to download drive programming software.

Hitachi's Full Featured Drive Series

  • Easy operation and setup by standard keypad
  • Powerful high-torque performance – 200% @ 3 Hz
  • Internal DB transistor up to 22 kW (30 hp)
  • EzSQ Internal PLC-like controller
  • Position control function offers servo-like performance
  • Long-life, easy-to-maintain design
  • NEMA1 conduit box optional
  • EMI Filter Integrated up to 110 kW
  • Conformity to global standards: UL, c-UL, CE and c-Tick
  • Ratings for the SJ700 line: 1/2 to 75hp, 230V, 3 phase; 1 to 125hp, 460V, 3 phase
  • For use with 3-phase motors only!
  • Purchase information is available in our store

3 phase 220VAC drives can be run on 220VAC single phase. The drive has to be upsized in amp rating. Click here to download a 2-page spec sheet for details.

    SJ300 Series (please see SJ700 series information above)

Specifications
Instruction Manual
Quick Reference Guide

Click here to download drive programming software.

Note: The SJ300 series of drives is being phased out. The replacement series is the SJ700. While there may be some limited availability of SJ300 products for a while, it is strongly recommended that you consider SJ700 for all present and future applications.

3 phase 220VAC drives can be run on 220VAC single phase. The drive has to be upsized in amp rating. Click here to download a 2-page spec sheet for details.
    L100 Series

More Info:
Specifications
 L100-MFU2 Series Supplement Manual
Instruction Manual
Quick Reference Guide

Click here to download drive programming software.

    L300P Series
  • Automatic energy saving function for your fan and pump applications
  • Easy operation with a multilingual operator panel
  • Compact design
  • Network compatibility
  • Carrier frequency selectable to 12kHz for quiet operation
  • Ratings: 15 to 75hp [input current 230V, 3 phase]; 15 to 175hp [input current 460V, 3 phase]
  • For use with 3-phase motors only!
  • Purchase information is available in our store
 3 phase 220VAC drives can be run on 220VAC single phase. The drive has to be upsized in amp rating. Click here to download a 2-page spec sheet for details.
    SJ100 Series
The SJ100 series is now obsolete. Customers are urged to consider the SJ200 model detailed above.
    Operator Interface/Networking Devices 
The Hitachi Serial Communications Operator
Interfaces, SC-OPE 3H and SC-OPE 3I, are easy-to-use inverter operator panels. Their four-line dot matrix displays show inverter status, and work in conjunction with their keypads to provide inverter control and parameter editing capability. The SC-OPE can be directly mounted on the inverter (in the case of the SJ300 and L300P only), panel-mounted (with the optional bezel kit), or DIN-rail mounted inside a panel (also with the optional bezel kit).
More Info
Top
Home | Our Store | About Us | Circuit Breakers & Motor Controllers | Electrical Disconnects | Fuse Holders | Power Distribution Block | Power Supplies
Push Button Switches | Selector Switches | Relays | Relay Bases | Terminal Block | Electrical Enclosures | DIN Rail | Wire Duct | Stack Lights | Light Curtains
Linear Rail & Bearings (Linear Slides) | Linear Stages | AC Variable Speed Drives | Servo Systems | Value Added Services | Downloads | Contact Us